Assignment Prompt & Instructions
[>Telecommunications Engineering homework help](https://www.sweetstudy.com/fields/engineering-telecommunications-engineering)
**Lab: Configuring Hard Phone and soft phone**
_Note: make sure the hand held receiver cord is plugged in the port on the bottom of the phone and not the side, the RJ-45 jack is in the LAN port and the power cable is attached and plugged in._
1. In order to begin configuring the Hard Phone first you must assign an IP Address
2. Press “menu”.
3. Choose “config”, then “Network”, Then “Static IP”.
4. Hard Phones are part of the 192.168.1.0/24 network. The server is set at 192.168.1.3/24. The Hard phones can be set at any other unused IP address except the default gateway of 192.168.1.100. Enter IP Address such as 192.168.1.55.
5. Enter Mask of 255.255.255.0
6. Enter gateway 192.168.1.100.
Reboot the hard phone.
Setting an extension of the hard phone can be done two ways.
1. Through the hard phone.
2. Through a Web browser.
Setting the extension through the Hard Phone:
1. Press Menu
2. Choose “config”, and the “SIP”
3. The SIP proxy server is the TrixBox IP address: 192.168.1.3
4. The SIP user Id is the extension assigned this phone
5. Password is the password assigned to the extension being assigned.
Reboot the hard phone from the main menu settings.
Setting the extension through a web browser:
**Note:** Make sure host that you are using is set to the proper IP address. 192.168.2.0/24 network with gateway of 192.168.2.100 (see instructions if necessary).
Note: IE will not work with TrixBox. Mozilla Firefox is recommended.
1. Open Mozilla Firefox and enter the IP address of the Hard phone you are assigning an extension.
2. Put in password
Default Admin password is “admin”
Default User password is “1234”
Click login
3. Choose “account” at the far right of the ribbon
4. The only items need to set extension is
SIP Server = TrixBox Server IP Address = 192.168.1.3
SIP user ID = assigned extension = Example 4000
Authenticate password = assigned password = example “secret”
Scroll to bottom of page and click update.
5. Click reboot
6. After the phone finishes the reboot, you can close the browser and check the settings.
The extension has been updated.
**Configuring X-Lite soft phone**
This lab will assist you in enabling X-Lite 4 soft phone voice communication using User ID extensions. When you open X-Lite 4, you should be able to enter your party’s extension and hit call. This lab demonstrates how to configure the terminal for dialing and receiving calls.
1. Open X-Lite 4, (‘Start > Programs > CounterPath X-Lite 4’)
2. Once X-Lite 4 has loaded, click the ‘Softphone’ button on the top left, a drop down should appear.
3. Select Account Settings.
4. Under the “Account” tab, Account name, User ID, Domain, and Password should appear.
5. The Account name can be anything referencing the User ID or name of the person(s) using X-Lite 4, (ie: ID1001, ID1002, Paul, Nina, etc).
6. The User ID, and Domain have asterisks meaning those entries are required. Enter one of the available User ID’s that was created in the previous lab, “Configuring Extensions.” The Domain is 192.168.1.3
7. After the User ID and Domain have been filled, enter the matching password for the User ID that was entered.
8. Display name can be left blank, or feel free to enter a name.
9. Once the account settings have been configured, go back to the main screen by clicking ‘Ok’ at the bottom right.
10. In the empty bar to the left of ‘Call,’ enter the extension, (User ID), you wish to call, and click call!
11. If your extension, (User ID), is for example 1010, your partner should be able to dial 1010, and reach you.
12. X-Lite 4 soft phone should now be configured for voice communication.
– [\
\
Lab4_Part_1_2_3_42.zip](https://www.sweetstudy.com/files/lab4-part-1-2-3-42-zip "Lab4_Part_1_2_3_42.zip")
– 2 years ago
**NET 364 LAB 4 ANSWER**
NOT RATED
Purchase the answer to view it
–
NET364_Lab4_Part_3_4-Mohammed.pdf
plagiarism checkPurchase $5