My Blog

Tag: Engineering

  • [Solved] Case Study #1

    ✓ Verified Academic Solution Available

    Executive Solution Overview

    Please find an article or news story about some whistleblowing situation. Please do not use high-profile cases like Snowden or Manning. If you can find the same story described by different sources, that would be all the better. Do not use some personal experience unless it was discussed in credible…

    Instant Solution Download

    $6.99

    Immediate access to the full model answer, formatted citations, and rubric breakdown.

    Need a Fresh Custom Paper?

    Have this question answered from scratch according to your specific instructions and deadline.

    Order on TutorsGallery →

    Assignment Prompt & Instructions

    Please find an article or news story about some whistleblowing situation. Please do not use high-profile cases like Snowden or Manning. If you can find the same story described by different sources, that would be all the better. Do not use some personal experience unless it was discussed in credible new sources. I need to be able to verify the account.
    Then, using the attached worksheet, discuss the case. After discussing the case in a concise paragraph, you will identify at least four key stakeholders and how you feel they were impacted. For example, if someone released company records and emails to blow the whistle, discuss whose emails and how the information led to actions against them. It is also possible a stakeholder was positively impacted by receiving a reward or gaining positive recognition.
    Discuss the final outcome (see directions), and most importantly, use your moral compass to describe or explain why you feel someone’s actions were morally wrong. Again, if there was no wrongdoing, why was the whistle blown? You are not to guess the person’s motivation. You are only concerned with justifying your position on the action's rightness or wrongness.
    Finally, imagine you are in a leadership position. What could you reasonably do to keep the situation from happening again and prevents someone from feeling the need to blow the whistle? You may feel the real wrongdoer is the whistleblower, depending on the situation. If so, then describe why what the company/government did or is doing is justified, again using your moral theories.
    This case study will be evaluated using the attached grading table. Please use this to your advantage to check your work before submitting it. Be sure to apply at least one (1) ethical system in depth, including the application of at least three (3) specific aspects of that system to the analysis of all parts of the worksheet/case study.
    \
    W4AssignmentCaseStudyAnalysisWorksheet.docx](https://www.sweetstudy.com/files/w4assignmentcasestudyanalysisworksheet-docx-10473011 "W4AssignmentCaseStudyAnalysisWorksheet.docx")
    \
    PreviewRubric_STEM270CaseStudyRubric-STEM270D005Fall2025-APEI.pdf](https://www.sweetstudy.com/files/previewrubric-stem270casestudyrubric-stem270d005fall2025-apei-pdf-10473013 "PreviewRubric_STEM270CaseStudyRubric-STEM270D005Fall2025-APEI.pdf")

  • [Solved] The Instruction Manual

    ✓ Verified Academic Solution Available

    Executive Solution Overview

    Assignment 1: The Instruction Manual Write the instructions for your class product. Include the logo you've started designing for the product in Discussion 3 on the first page of the manual, as well. These instructions should guide users through the process of using and /or caring for the product bo…

    Instant Solution Download

    $6.99

    Immediate access to the full model answer, formatted citations, and rubric breakdown.

    Need a Fresh Custom Paper?

    Have this question answered from scratch according to your specific instructions and deadline.

    Order on TutorsGallery →

    Assignment Prompt & Instructions

    Assignment 1: The Instruction Manual
    Write the instructions for your class product. Include the logo you've started designing for the product in Discussion 3 on the first page of the manual, as well.
    These instructions should guide users through the process of using and /or caring for the product both safely and efficiently.
    This assignment consists of TWO main parts: The actual product logo and instructions themselves and then an overview of the process you used to write them.
    Part 1: Product Instructions
    Write instructions for the safe assembly (if necessary), use, and / or care of your product for its end users. Consider the end user's familiarity with similar products before writing the instructions. Conduct your own research to determine safety concerns and protocols for safe product operation.
    The final draft of the instructions should be around 3-4 double spaced pages long, and should include a combination of text and graphics. Be sure to include the working draft of your product's logo on the first page of these instructions. How many graphics you use it up to you, but every graphic must have a function and must be useful for the reader. Consider whether a graphic or a written description –or perhaps a combination of the two– would be most useful.
    Instructional content may vary by product, but will likely include the following sections:
    A table of contents
    A brief introduction that builds good will with readers and highlights the product's USP
    Tools needed for assembly
    Safety warnings
    Step-by-step procedures for use
    An FAQs or troubleshooting section
    Methods of contacting your company for assistance
    Part 2: Your Instruction-Writing Process
    At the end of the instruction manual take a moment respond to the four following questions. The answers to these questions should be relatively short, and not more than 1 double-spaced page long.
    1. Who is your target audience? Provide as many demographics as possible, including but not limited to audience members' expected age, occupation, interest level, socioeconomic status, and so on.
    2. What guided your font size and type decisions in this document?  What informed your design decisions regarding headings, white space, line space, color and so on? List the main principles of page design you used in these instructions and explain how they helped you in your work.
    3. What problems, if any, did you encounter while writing the instructions? How did you solve them?
    4. What planning steps did you complete before writing the instructions?
    Submit Parts 1 and 2 in a SINGLE MS Word / PDF document.

  • [Solved] MicrosoftProjectStepByStep201611.zip

    ✓ Verified Academic Solution Available

    Executive Solution Overview

    [>Civil Engineering homework help](https://www.sweetstudy.com/fields/engineering-civil-engineering) MicrosoftProjectStepByStep201611.zip – 2 years ago

    Instant Solution Download

    $6.99

    Immediate access to the full model answer, formatted citations, and rubric breakdown.

    Need a Fresh Custom Paper?

    Have this question answered from scratch according to your specific instructions and deadline.

    Order on TutorsGallery →

    Assignment Prompt & Instructions

    [>Civil Engineering homework help](https://www.sweetstudy.com/fields/engineering-civil-engineering)

    MicrosoftProjectStepByStep201611.zip

    – 2 years ago

  • [Solved] Fluid Mechanics

    ✓ Verified Academic Solution Available

    Executive Solution Overview

    WATER FILTRATION PLANT A fresh young graduate from Bahrain polytechnic came up with an idea to set up a Water Treatment Plant to purify polluted ground water. Figure 1 shows the schematic of the water filtration plant with two overhead tanks namely overhead tank 1 and overhead tank 2. The plant also…

    Instant Solution Download

    $6.99

    Immediate access to the full model answer, formatted citations, and rubric breakdown.

    Need a Fresh Custom Paper?

    Have this question answered from scratch according to your specific instructions and deadline.

    Order on TutorsGallery →

    Assignment Prompt & Instructions

    WATER FILTRATION PLANT

    A fresh young graduate from Bahrain polytechnic came up with an idea to set up a Water Treatment Plant to purify polluted ground water. Figure 1 shows the schematic of the water filtration plant with two overhead tanks namely overhead tank 1 and overhead tank 2. The plant also has 3 filtration units namely filtration plant 1, plant 2 & plant 3 respectively. The idea is to purify impure ground water and store it in overhead plant 2.

    Limitations –

    1. You cannot change the direction of flow.

    2. You cannot increase the number of pipes. Each arrow is a pipe in Figure 1.

    3. You cannot change the heads.

    Your design should mainly consist of various activities that include pressure drop calculations, selection of pumps, design of venturi meter and selection of check valve, the details of which are shown below:

    A. You are to size the pipelines and to select a suitable pump. The proposed piping layout is as per the attached schematic. You are given details of the required lengths of pipes and the number of bends involved to get the chilled water to each of the cooling coils. There are isolating valves around each piece of equipment so that maintenance work can be carried out. (LOs: 1,2,3,4)

    B. You have also been asked to design a venturi flow meter, a form of flow measurement device, to be installed after the pump so that the total water flow can be measured on a continuous basis. You will need to demonstrate how the venturi will work. (LOs: 2,3)

    C. Select the appropriate check valves which must be fitted before each coil at the supply lines according to all the engineering parameters of the system. (LOs:2,4,5)

    D. Prepare a PowerPoint presentation file outlining your system design, including pipe and fittings sizing, pump and motor selection, design of the venturi and selection of the check valves. (LOs: 1,2,3,4,5)

    – [\
    \
    DOC-20250404-WA0000..pdf](https://www.sweetstudy.com/files/doc-20250404-wa0000-pdf "DOC-20250404-WA0000..pdf")

    – 2 years ago

  • [Solved] ENS 491 – Graduation Project Proposal-6 Pages Engineering Research Proposal

    ✓ Verified Academic Solution Available

    Executive Solution Overview

    Paper instructions: Design and development miniature energy harvesting device FENS The aim is to design and develop a new generation miniature thermophotovoltaic or thermoelectric device to provide power to daily used electronic appliances. Major Design: Energy harvesting from thermal energy has bee…

    Instant Solution Download

    $6.99

    Immediate access to the full model answer, formatted citations, and rubric breakdown.

    Need a Fresh Custom Paper?

    Have this question answered from scratch according to your specific instructions and deadline.

    Order on TutorsGallery →

    Assignment Prompt & Instructions

    Paper instructions:

    Design and development miniature energy harvesting device    FENS

    The aim is to design and develop a new generation miniature thermophotovoltaic or thermoelectric device to provide power to daily used electronic appliances.

    Major Design:    Energy harvesting from thermal energy has been widely exploited to achieve energy savings and clean technologies. A cost effective and environmental friendly solution for the growing individual energy needs. should be provided. The device to be fabricated by the groups should be capable of generating substantial amount of power (few Watts) and be compact at the same time.

    Recommended Disciplines:    IE – Industrial Engineering

    ME – Mechatronics Engineering

    – [\
    _Draft_ProposalTemplate.doc](https://www.sweetstudy.com/files/-draft-proposaltemplate-doc "_Draft_ProposalTemplate.doc")

    – 2 years ago

    **ENS 491 – Graduation Project Proposal-6 Pages Engineering Research Proposal**

    NOT RATED

    Purchase the answer to view it

    ![blurred-text](https://www.sweetstudy.com/assets/images/blurred-text.c4cde9f021be0abed13ca77c3d6d43d3.png)

    –

    EngProposal.doc

    ![homework question](https://www.sweetstudy.com/assets/images/loader.e99f1ef323fecd089c1cdcaaadcd1f9b.gif)

    plagiarism checkPurchase $60

  • [Solved] NET364 lab 1

    ✓ Verified Academic Solution Available

    Executive Solution Overview

    [>Telecommunications Engineering homework help](https://www.sweetstudy.com/fields/engineering-telecommunications-engineering) NET364 Lab instructions **Note: Please replace TDC464 with NET364** 1. Install VMware Player into your computer from: a. [http://www.vmware.com/products/player/playerpro-eva…

    Instant Solution Download

    $6.99

    Immediate access to the full model answer, formatted citations, and rubric breakdown.

    Need a Fresh Custom Paper?

    Have this question answered from scratch according to your specific instructions and deadline.

    Order on TutorsGallery →

    Assignment Prompt & Instructions

    [>Telecommunications Engineering homework help](https://www.sweetstudy.com/fields/engineering-telecommunications-engineering)

    NET364 Lab instructions

    **Note: Please replace TDC464 with NET364**

    1. Install VMware Player into your computer from:

    a. [http://www.vmware.com/products/player/playerpro-evaluation.html](http://www.vmware.com/products/player/playerpro-evaluation.html)

    2. Download the Linux VoIP TrixBox trixbox-2.8.0.4.iso from Week2.

    3. Install TrixBox using your VMware Player.

    a. Start your VMware Player on your PC See below

    ![](https://www.sweetstudy.com/questions/net364-lab-1)

    b. Click on create a New Virtual Machine

    c.

    d. ![](https://www.sweetstudy.com/questions/net364-lab-1)

    e. Select Installer disc image file (iso) and browse select the file “trixbox-2.8.0.4.iso” and click next.

    f. Type in the following info:

    i. Full name type: “NET364 Linux VoIP TrixBox”

    ii. Username: student ——————à all lowercase

    iii. Password: P@$$w0rd01 ——————à all lowercase, Zero not letter “O”

    g. Click Next for the virtual machine name type: “ **NET364_TrixBox_2.8.0.4**”

    ![](https://www.sweetstudy.com/questions/net364-lab-1)

    h. Click next and accept the default options, see below:

    ![](https://www.sweetstudy.com/questions/net364-lab-1)

    i. Click Next and accept the default options, see below and click finish.

    ![](https://www.sweetstudy.com/questions/net364-lab-1)

    j. The next step is the system will install TrixBox when done login using the following info:

    i. Username: root

    ii. Password: student

    k. The Lab1 is to **submit screenshot** of your TrixBox VoIP Linux Server by typing ifconfig at command line, see below:

    ![](https://www.sweetstudy.com/questions/net364-lab-1)

    l. **Note:**to get out the Virtual Machine back to Window you will need to hold down the Ctrl+Alt key at the same time.

    – [\
    \
    NET364_Lab1_instructions3.docx](https://www.sweetstudy.com/files/net364-lab1-instructions3-docx "NET364_Lab1_instructions3.docx")

    – 2 years ago

    **NET 364 LAB 1 ANSWER**

    NOT RATED

    Purchase the answer to view it

    ![blurred-text](https://www.sweetstudy.com/assets/images/blurred-text.c4cde9f021be0abed13ca77c3d6d43d3.png)

    –

    TrixBoxVoIPVirtualMachineWorkstationSetup.docx

    ![homework question](https://www.sweetstudy.com/assets/images/loader.e99f1ef323fecd089c1cdcaaadcd1f9b.gif)

    plagiarism checkPurchase $5

  • [Solved] NET 364 LAB 4

    ✓ Verified Academic Solution Available

    Executive Solution Overview

    [>Telecommunications Engineering homework help](https://www.sweetstudy.com/fields/engineering-telecommunications-engineering) **Lab: Configuring Hard Phone and soft phone** _Note: make sure the hand held receiver cord is plugged in the port on the bottom of the phone and not the side, the RJ-45 jack…

    Instant Solution Download

    $6.99

    Immediate access to the full model answer, formatted citations, and rubric breakdown.

    Need a Fresh Custom Paper?

    Have this question answered from scratch according to your specific instructions and deadline.

    Order on TutorsGallery →

    Assignment Prompt & Instructions

    [>Telecommunications Engineering homework help](https://www.sweetstudy.com/fields/engineering-telecommunications-engineering)

    **Lab: Configuring Hard Phone and soft phone**

    _Note: make sure the hand held receiver cord is plugged in the port on the bottom of the phone and not the side, the RJ-45 jack is in the LAN port and the power cable is attached and plugged in._

    1. In order to begin configuring the Hard Phone first you must assign an IP Address

    2. Press “menu”.

    3. Choose “config”, then “Network”, Then “Static IP”.

    4. Hard Phones are part of the 192.168.1.0/24 network. The server is set at 192.168.1.3/24. The Hard phones can be set at any other unused IP address except the default gateway of 192.168.1.100. Enter IP Address such as 192.168.1.55.

    5. Enter Mask of 255.255.255.0

    6. Enter gateway 192.168.1.100.

    Reboot the hard phone.

    Setting an extension of the hard phone can be done two ways.

    1. Through the hard phone.

    2. Through a Web browser.

    Setting the extension through the Hard Phone:

    1. Press Menu

    2. Choose “config”, and the “SIP”

    3. The SIP proxy server is the TrixBox IP address: 192.168.1.3

    4. The SIP user Id is the extension assigned this phone

    5. Password is the password assigned to the extension being assigned.

    Reboot the hard phone from the main menu settings.

    Setting the extension through a web browser:

    **Note:** Make sure host that you are using is set to the proper IP address. 192.168.2.0/24 network with gateway of 192.168.2.100 (see instructions if necessary).

    Note: IE will not work with TrixBox. Mozilla Firefox is recommended.

    1. Open Mozilla Firefox and enter the IP address of the Hard phone you are assigning an extension.

    ![](https://www.sweetstudy.com/questions/net-364-lab-4)

    2. Put in password

    ![](https://www.sweetstudy.com/questions/net-364-lab-4)

    Default Admin password is “admin”

    Default User password is “1234”

    Click login

    3. Choose “account” at the far right of the ribbon

    ![](https://www.sweetstudy.com/questions/net-364-lab-4)

    4. The only items need to set extension is

    SIP Server = TrixBox Server IP Address = 192.168.1.3

    SIP user ID = assigned extension = Example 4000

    Authenticate password = assigned password = example “secret”

    ![](https://www.sweetstudy.com/questions/net-364-lab-4)

    Scroll to bottom of page and click update.

    5. Click reboot

    ![](https://www.sweetstudy.com/questions/net-364-lab-4)

    6. After the phone finishes the reboot, you can close the browser and check the settings.

    The extension has been updated.

    **Configuring X-Lite soft phone**

    This lab will assist you in enabling X-Lite 4 soft phone voice communication using User ID extensions. When you open X-Lite 4, you should be able to enter your party’s extension and hit call. This lab demonstrates how to configure the terminal for dialing and receiving calls.

    1. Open X-Lite 4, (‘Start > Programs > CounterPath X-Lite 4’)

    2. ![](https://www.sweetstudy.com/questions/net-364-lab-4)Once X-Lite 4 has loaded, click the ‘Softphone’ button on the top left, a drop down should appear.

    3. Select Account Settings.

    4. Under the “Account” tab, Account name, User ID, Domain, and Password should appear.

    5. The Account name can be anything referencing the User ID or name of the person(s) using X-Lite 4, (ie: ID1001, ID1002, Paul, Nina, etc).

    6. The User ID, and Domain have asterisks meaning those entries are required. Enter one of the available User ID’s that was created in the previous lab, “Configuring Extensions.” The Domain is 192.168.1.3

    7. After the User ID and Domain have been filled, enter the matching password for the User ID that was entered.

    8. Display name can be left blank, or feel free to enter a name.

    9. Once the account settings have been configured, go back to the main screen by clicking ‘Ok’ at the bottom right.

    10. In the empty bar to the left of ‘Call,’ enter the extension, (User ID), you wish to call, and click call!

    11. ![](https://www.sweetstudy.com/questions/net-364-lab-4)If your extension, (User ID), is for example 1010, your partner should be able to dial 1010, and reach you.

    12.  X-Lite 4 soft phone should now be configured for voice communication.

    – [\
    \
    Lab4_Part_1_2_3_42.zip](https://www.sweetstudy.com/files/lab4-part-1-2-3-42-zip "Lab4_Part_1_2_3_42.zip")

    – 2 years ago

    **NET 364 LAB 4 ANSWER**

    NOT RATED

    Purchase the answer to view it

    ![blurred-text](https://www.sweetstudy.com/assets/images/blurred-text.c4cde9f021be0abed13ca77c3d6d43d3.png)

    –

    NET364_Lab4_Part_3_4-Mohammed.pdf

    ![homework question](https://www.sweetstudy.com/assets/images/loader.e99f1ef323fecd089c1cdcaaadcd1f9b.gif)

    plagiarism checkPurchase $5

  • [Solved] NET 364 LAB 3

    ✓ Verified Academic Solution Available

    Executive Solution Overview

    [>Telecommunications Engineering homework help](https://www.sweetstudy.com/fields/engineering-telecommunications-engineering) **LAB: Accessing TrixBox Server & Resetting to Defaults** 1) Access the TrixBox server via IP address 192.168.1.3/24 with 192.168.2.100 as the gateway. _Note:_ _Internet Expl…

    Instant Solution Download

    $6.99

    Immediate access to the full model answer, formatted citations, and rubric breakdown.

    Need a Fresh Custom Paper?

    Have this question answered from scratch according to your specific instructions and deadline.

    Order on TutorsGallery →

    Assignment Prompt & Instructions

    [>Telecommunications Engineering homework help](https://www.sweetstudy.com/fields/engineering-telecommunications-engineering)

    **LAB: Accessing TrixBox Server & Resetting to Defaults**

    1) Access the TrixBox server via IP address 192.168.1.3/24 with 192.168.2.100 as the gateway.

    _Note:_ _Internet Explorer encounters problems connecting to the TrixBox server, Mozilla Firefox should be used. IP address may need to be configured manually in the Network Connections settings of Windows to allow proper connectivity._

    2) The TrixBox User GUI should appear. At the top right **User mode – switch** should appear. Click **switch**.

    3) Enter the username ‘maint,’ and password ‘password.’

    4) You are now in _maintenance mod_ e and can manually set certain features back to defaults.

    5) Click on the **PBX** tab and select **PBX Settings**.

    ![](https://www.sweetstudy.com/questions/net-364-lab-3)

    6) On the left side list, under **Basic**, select **Extensions**.

    7) Now, if extensions have been created, they should appear on the right side, (ie: Jane Doe, John Smith, etc).

    ![](https://www.sweetstudy.com/questions/net-364-lab-3)

    8) Once clicked on, their details should appear. Select **Delete Extension ####** which is at the top of the page.

    ![](https://www.sweetstudy.com/questions/net-364-lab-3)

    9) Repeat step 8 for all extensions.

    10) System recordings will need to be deleted. Select System Recordings on the left side list, (at the bottom). Delete all but the highlighted recordings in the picture below, (similar to deleting extensions).

    ![](https://www.sweetstudy.com/questions/net-364-lab-3)

    11) After all extensions have been deleted and all settings have been changed, click **Apply Configuration Settings** at the top.

    ![](https://www.sweetstudy.com/questions/net-364-lab-3)

    12) X-Lite 4 soft phones will not need to be reset to defaults since they are installed in a Deep Freeze environment and automatically get reset when computers are restarted.

    13) To reset the hard phones, simply select the **menu** button, **config**, and find **factory reset**.

    14) The TrixBox server, soft phones, and hard phones should now be set to nearest defaults.

    YOU SHOULD NOT have to complete these last steps. In the case were somebody does something that they should not have done or if some natural disaster strikes then these step will be necessary.

    1) If there is a power failure or the router is unplugged, log into the router via console and use the command:  _copy startup-config running-config_

    2) The trixbox server is the means through which all of the phones can communicate and store their information. The trixbox version is 2.8.0.3 and is installed on the Dell Power Edge 1750 server. If, for some reason, the trixbox server becomes unusable or corrupted it will then need to be reinstalled. The Trixbox CD is provided and the steps to restore the system are as follows.

    1. Make sure that the server is set up to boot from disk.

    2. Set the burned disk inside the CD-ROM drive and reboot the server.

    3. You should see the following screen. Press enter when you are ready and remember that it will format the whole drive. ![](https://www.sweetstudy.com/questions/net-364-lab-3)

    4. Next, you should choose your keyboard type which should be ‘us’![](https://www.sweetstudy.com/questions/net-364-lab-3)

    5. Next, select your appropriate time zone which should be central time. ![](https://www.sweetstudy.com/questions/net-364-lab-3)

    6. Next, set the root password.

    ![](https://www.sweetstudy.com/questions/net-364-lab-3)

    7. Now the installation process will start. When the installation is complete the computer should restart. Please note that you will have to take out the disk when the computer restart or else it will take you back to the beginning of the installation process.

    8. After you log in with the password that you created, you need to then enable the interfaces. First you need to run the #system-config-network command and add the following information on both interfaces. ![](https://www.sweetstudy.com/questions/net-364-lab-3)

    9. Now everything should be back to its original defaults.

    – [\
    \
    Lab3_Part_1_2_3_41.zip](https://www.sweetstudy.com/files/lab3-part-1-2-3-41-zip "Lab3_Part_1_2_3_41.zip")

    – 2 years ago

    **NET 364 LAB 3 ANSWER**

    NOT RATED

    Purchase the answer to view it

    ![blurred-text](https://www.sweetstudy.com/assets/images/blurred-text.c4cde9f021be0abed13ca77c3d6d43d3.png)

    –

    NET364_Lab3_Mohammed.docx

    ![homework question](https://www.sweetstudy.com/assets/images/loader.e99f1ef323fecd089c1cdcaaadcd1f9b.gif)

    plagiarism checkPurchase $5

    – ### [NET 364 LAB 2](https://www.sweetstudy.com/questions/net-364-lab-2)

    NOT RATED

    2 years ago

  • [Solved] NET 364 LAB 2

    ✓ Verified Academic Solution Available

    Executive Solution Overview

    [>Telecommunications Engineering homework help](https://www.sweetstudy.com/fields/engineering-telecommunications-engineering) – In Lab 2 you will need to establish a connection between your TrixBox (GUI VoIP System) running from your Internet Browser (Chrome, Firefox, Microsoft Edge, Safari): 1. On …

    Instant Solution Download

    $6.99

    Immediate access to the full model answer, formatted citations, and rubric breakdown.

    Need a Fresh Custom Paper?

    Have this question answered from scratch according to your specific instructions and deadline.

    Order on TutorsGallery →

    Assignment Prompt & Instructions

    [>Telecommunications Engineering homework help](https://www.sweetstudy.com/fields/engineering-telecommunications-engineering)

    – In Lab 2 you will need to establish a connection between your TrixBox (GUI VoIP System) running from your Internet Browser (Chrome, Firefox, Microsoft Edge, Safari):

    1. On Physical OS with Windows
    2. Virtual Machine with Windows

    – Please use one of the following Windows OS: Windows 10/11.
    – Please make sure your Windows OS Editions are one of the following OSs:

    1. Education
    2. Professional
    3. Enterprise Edition

    – You will connect your Windows OS to an Asterisk Linux VoIP Box running as a Virtual Machine.
    – Download and Install Softphone " **Zoiper**" into your Windows 10 OS (Physical or Virtual).
    – Download Softphone Zoiper: [Zoiper_3_9_Setup1.zip](https://d2l.depaul.edu/content/enforced/1059340-NET_464_801_1145/X_Lite_4_9_5_1_and_Zoiper_3_9_Setup1.zip) **(Do not install X-Lite)**
    – You must by now already done Lab1 and able to run your VoIP Linux Server.

    For Lab 2 you will need to submit 2 screenshots:

    The first screenshot showing that you are able to login to TrixBox using your Internet Browser

    The Second Screenshot showing that you were able to install Zoiper on your Windows 10 OS (Physical or Virtual)

    Write 1 page summary describing how you were able to establish the connection from Asterisk VoIP server VM (VirtualBox/VMWare) to your Windows 10 OS running as (Physical or Virtual)

    – [\
    \
    NET364_Lab2_Part1_and_Part21.zip](https://www.sweetstudy.com/files/net364-lab2-part1-and-part21-zip "NET364_Lab2_Part1_and_Part21.zip")

    – 2 years ago

    **NET 364 LAB 2 ANSWER**

    NOT RATED

    Purchase the answer to view it

    ![blurred-text](https://www.sweetstudy.com/assets/images/blurred-text.c4cde9f021be0abed13ca77c3d6d43d3.png)

    –

    NET364_464_LAB2_AL-MANSOORI.pdf

    ![homework question](https://www.sweetstudy.com/assets/images/loader.e99f1ef323fecd089c1cdcaaadcd1f9b.gif)

    plagiarism checkPurchase $5

    – ### [NET 364 LAB 3](https://www.sweetstudy.com/questions/net-364-lab-3)

    NOT RATED

    2 years ago

  • [Solved] in

    ✓ Verified Academic Solution Available

    Executive Solution Overview

    In-depth study guidance and analytical solution covering in.

    Instant Solution Download

    $6.99

    Immediate access to the full model answer, formatted citations, and rubric breakdown.

    Need a Fresh Custom Paper?

    Have this question answered from scratch according to your specific instructions and deadline.

    Order on TutorsGallery →

    Assignment Prompt & Instructions

    Full assignment prompt and step-by-step guidance are included in the downloadable solution file.